MATRIX GOLF SHAFTS
HEADS
SHAFTS
GRIPS
MORE
Clubmakers, Hobbyists, Long Drivers, PGA Pros, Members of 4GEA, FGI, GO, Incepta & other golf
organizations contact us or call us @ 920-892-6120 for discounts and wholesale pricing.
WOODS
OZIK XCON M2 DESIGN
OZIK HD SERIES
OZIK TP HD SERIES
OZIK TP SERIES
IRONS
STUDIO SERIES
STUDIO SERIES
Matrix Studio Woods
Specifications
The Matrix Studio has quickly become the go-to shaft of the select group of highly-specialized professional golf club builders. Matrix Studio shafts carry the rare distinction of being a high performance shaft line that is easy to hit. With an unmatched variety of wood-to-hybrid-to-iron weights and ball flights, Studio provides the serious player the chance to fully blend from driver to wedge.
Technology
In the effort to provide a full studio fitting experience, Matrix Studio shafts come in four wood weights: Studio 64, 74, 84, and 94; four iron weights: Studio 64, 74, 84, and 94; and, new for 2008, two hybrid weights: Studio 64 and 84. Each of the Studio weights has a corresponding ball flight. Ball flight lowers as shaft weight gets heavier.
Mix and match weights to blend high launching, lighter weight drivers or long-irons with lower launching, heavier fairway woods or mid-to-short irons or choose one perfect Studio model throughout a woods or iron set-up for uniform, predictable feel.
Each Matrix Studio shaft is tested for Circum-Flex Integrity [CFI], a measure of uniform flex, no matter the shaft alignment. Then through Matrix Multi-Matching process, each shaft is tested for proper tip-to-butt section proportionality. No other manufacturer employs this process. The Matrix Multi-Matching and CFI produce the most repeatable, accurate performance in a golf shaft today.
Visit a premium performance fitting studio that specializes in Matrix Studio products and dial-in to the perfect matrix of Studio performance.
MATRIX Studio 64 .335 tip
L A R F S SRG X
PRICE: $65.00
MATRIX Studio 74 .335 tip
R F S SRG X
MATRIX Studio 84 .335 tip
R F S SRG X
MATRIX Studio 94 .335 tip
F S SRG X
OZIK CODE SERIES
Matrix OZIK Code-6, Code-7, and Code-8 combine the new ideas of OZIK with past Matrix technologies like Tip Torsional Resistence. The combination of the two ideologies yields extremely solid, tip-stable designs that retain the smooth OZIK feel. Code-7 and Code-8 mirror each other in design, with only minor differences in launch angle and spin rate (Code-7 being higher in each). Code-6 is unique among the group. In Code-6, designer Daniel You incorporated a 20-inch Boron “hinge” near the upper-mid section of the shaft. The purpose of “the hinge” is to soften the mid section for momentum and allow for a slight “weighting” of the tip section. The resulting Code-6 is a rare light weight shaft that still has head feel.
OZIK Code 6 Price $300.00
A R F S SG X XX
OZIK Code 7 Price $300.00
R F S SG X XX
OZIK XCON 5 Price $300.00
A R F S
OZIK Code 8 Price $300.00
F S SG X XX
OZIK XCON SERIES
Matrix OZIK XCON (X-Axis Control) shafts are built for high-launch, low-spin ball flights. OZIK XCON 5, 6, 7, and the 8 Hybrid are made purely of carbon graphite and introduce new Matrix technologies DEA, GEF, and AVF. Created as highly efficient delivery systems, XCON designs bring maximum performance in high MOI clubheads and stable feel for all players.
Technology
Deformation of Energy Analysis: Matrix OZIK XCON introduces golf to our new DEA (Deformation of Energy Analysis) method for evaluating how shaft construction relates to performance. In physics, Power = Torque x Angular Velocity (speed that a mass rotates around an axis – such as in a golf swing). Unfortunately, with most golf shafts, the energy that should be delivered to the clubhead and ball (the mass) is deformed and lost through inefficiencies in the shaft’s design. DEA reveals these energy loss points. When Matrix OZIK XCON shafts are built with minimized or eliminated areas of instability, more energy and power are delivered to the ball and a highly stable impact position is created. More stable contact means more power, more effective MOI, and more spin.
Gradient Energy Flow tip design: conventional golf shafts experience their greatest amount of energy deformation between the mid and tip sections. This “weakness” will reduce the stability of the clubhead at impact and can accentuate the “sliding” of the clubface across the ball, leading to higher spin rates. By contrast, Matrix OZIK XCON shafts use a direct Gradient Energy Flow. While static measurements like “tip deflection” and “CPM” remain similar to less energy-efficient counterparts, concentrating on more direct energy flow means more energy reaches the clubhead. More stability is created at impact, resulting in higher MOI. Less clubface-to-ball friction results in less backspin — a true high launch, low spin flight can be created.
Angular Velocity Fulcrum butt design: Much like in a modern archer’s bow, the OZIK XCON seeks to create momentum and angular velocity by using the biggest, strongest portion of the shaft (the butt section) more effectively. Conventional golf shafts do not focus on the butt section to build kinetic energy, preferring instead to allow the shaft’s tip section (the shaft’s smallest, weakest point) to control angular velocity, launch angle, and back spin rates. In Matrix OZIK XCON shafts, using ideas borrowed from archery, energy is built in the butt section and then dynamically released towards the mid section. With this high-energy butt section and gradient energy flow through the tip section, a giant, powerful fulcrum is created, greatly increasing the force that is applied to the clubhead and the golf ball.
OZIK XCON ALTUS Price $450.00
A R F S SG X XX
OZIK XCON 6 Price $300.00
A R F S SG X XX
OZIK XCON 7 Price $300.00
R F S SG X XX
OZIK XCON SPECIAL EDITIONS ALTUS DESIGN
Matrix OZIK XCON Special Editions represent our constant pursuit of next-level technologies. This group of true prototypes is constantly evolving as Matrix makes new performance discoveries. XCON Special Editions do not follow a typical release schedule, so check back often to see where inspiration or necessity have taken us.
Technology
In early 2005, Matrix OZIK Altus may have been the first true high-launch, low-spin, and high ball-speed shaft ever created. In 2007, Altus got a facelift with the inclusion of new XCON technologies. The resulting Matrix OZIK XCON Altus and XCON Altus “Low Torque” feature the same unique bias rolling method, full length Zylon, and Boron-enhanced tip section combined with XCON efficiency and stability ideas. Players bagging OZIK XCON Altus should be prepared for ultra-smooth feel with a high-launch, low-spin ballflight.
Matrix OZIK XCON Altus Hybrid has quickly become one of the most used hybrid shafts on the PGA Tour, including three users in 2007’s end-of-the-year world Top 10 and the #1 player on the European Order of Merit. The bias rolling pattern and full length Zylon are left out of Altus Hybrid, leaving a highly efficient, high launch performance design with more stability for utilities.
OZIK XCON ALTUS LT Price $450.00
S SG X XX
OZIK XCON ALTUS HYBRID Price $150.00
R F S SG X XX
.335 TIP
.335 TIP
.370 TIP
.335 TIP
.335 TIP
.335 TIP
.335 TIP
.335 TIP
.335 TIP
Call 920-892-6120 between 7:00 am to 10:00 pm central time 7 days a week to order by phone.
Shipping within the U.S (all 50 states) is only $6.00 Shipping to Canada is $20.00 Worldwide shipping is $30.00
FOR GREAT DEALS
